8675561653518
Unit 309, Yinglong Building, Cuishan Road, Luohu District, Shenzhen, Guangdong, China
Adhesive Lined Dual wall heat shrink tube with hot melt glue
Application:
Heat shrink cable sleeve (Dual Wall Heat Shrinkable Tube) is manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for protected articles. Used to protectable bundles wires and metal tubes against water and moisture.
>Shrinking Ratio: 2:1, 3:1, 4:1
>Approval: UL 125°C VW-1 600V
>Meet: SAE-AMS-DTL-23053/4
>Operating temperature:-45°Cto +125°C
>Minimum shrink temperature:80°C
>Minimum fully recovery temperature:120°C
>Standard color: Black
>Special color: Red, Blue, White, Yellow
>Clear (non-flame retardant jacket)
Technical Data:
Property | Test Method | Typical Data |
Tensile strength | ASTM D 2671 | >10.4MPa (min.) |
Tensile strength after aging (158°C/168hrs.) |
ASTM D 2671 |
Remains 70% |
Elongation at break | ASTM D 2671 | >300% (min.) |
Elongation at break after aging (158°C/168hrs.) |
ASTM D 2671 |
100% (min.) |
Longitudinal shrinkage | UL 224 | 0 to -10% |
Heat shock | 250°C, 4hrs. | No cracking, no dropping |
Cold bend (-30°C/1hr.) | ASTM D 2671 | No cracking |
Voltage withstand (AC 2500V/ 60 seconds) |
ASTM D 2671 |
No breakdown |
Volume resistance | ASTM D 876 | >1014Ω.cm (min.) |
Flammability | SAE-AMS-DTL-23053/4 | Self-extinguish in 30sec. |
Copper corrosion (158°C/168hrs.) |
UL 224 |
Pass |
Water absorption | ASTM D 570 | <0.5% |
DHST-3X
Specs. | As Supplied I.D. (mm) (Min) | After Recovery (mm) | Standard length (m/spool) | |||
Size (mm) | Inch | W.T. (Nom) | W.T of Adhesive | I.D. (Max) | ||
φ3.2 | 1/8 | 3.2 | 0.95±0.15 | 0.40±0.10 | 1.00 | 200 |
φ4.8 | 3/16 | 4.8 | 1.10±0.15 | 0.40±0.10 | 1.60 | 100 |
φ6.4 | 1/4 | 6.4 | 1.20±0.15 | 0.45±0.10 | 2.20 | 100 |
φ7.9 | 5/16 | 7.9 | 1.35±0.15 | 0.50±0.10 | 2.70 | 100 |
φ9.5 | 3/8 | 9.5 | 1.45±0.20 | 0.50±0.15 | 3.20 | 50 |
φ12.7 | 1/2 | 12.7 | 1.70±0.20 | 0.55±0.15 | 4.20 | 1.22 |
φ15.0 | 5/8 | 15.0 | 1.80±0.20 | 0.50±0.15 | 5.20 | 1.22 |
φ19.1 | 3/4 | 19.1 | 2.00±0.20 | 0.50±0.15 | 6.30 | 1.22 |
φ25.4 | 1 | 25.4 | 2.10±0.25 | 0.50±0.15 | 8.50 | 1.22 |
φ30.0 | 1-1/4 | 30.0 | 2.20±0.25 | 0.60±0.15 | 10.20 | 1.22 |
φ39.0 | 1-1/2 | 39.0 | 2.40±0.25 | 0.60±0.15 | 13.50 | 1.22 |
φ50.0 | 2 | 50.0 | 2.70±0.25 | 0.80±0.15 | 17.00 | 1.22 |
DHST-4X
Normal size | As supplied (mm) Inside diameter (Min.) | After recovered (mm) |
Standard length (m/spool) | |||
(mm) |
(inch) | Inside diameter (Max.) | Total wall thickness
| Adhesive thickness (Nom.) | ||
4/1 | 2/13 | 4.0 | 1.0 | 1.0±0.15 | 0.4±0.15 | 200 |
6/1.5 | 1/ 4 | 6.0 | 1.5 | 1.1±0.15 | 0.4±0.15 | 100 |
8/2 | 5/16 | 8.0 | 2.0 | 1.2±0.15 | 0.5±0.15 | 1.22 |
12/3 | 1/2 | 12.0 | 3.0 | 1.4±0.15 | 0.5±0.15 | 1.22 |
16/4 | 5/ 8 | 16.0 | 4.0 | 1.7±0.15 | 0.6±0.15 | 1.22 |
20/5 | 15/19 | 20.0 | 5.0 | 2.0±0.25 | 0.6±0.15 | 1.22 |
24/6 | 1 | 24.0 | 6.0 | 2.1±0.25 | 0.6±0.15 | 1.22 |
32/8 | 1-1/4 | 32.0 | 8.0 | 2.4±0.25 | 0.7±0.15 | 1.22 |
52/13 | 2 | 52.0 | 13.0 | 2.4±0.25 | 0.7±0.15 | 1.22 |
*Special size, cutting pieces are available on request.
Other products:
Dicore is a professional supplier of various heat shrinkable products, including Different kinds of Heat Shrinkable Tubing/Sleevings, Heat Shrinkable Moulded Shapes products from kinds of material like Polyolefin, Silicone Rubber, PTFE, Polyvinylidene Fluoride(PVDF), Fluoroelastomer(Viton),etc. They are widely used in the field of Energy, Electronic, Automotive, Communications, Military, and Building&shipbuilding to provide effective insulation and protection the functional parts, components and systems.
Dicore has been dedicated to this field since 2003 as an exporter and distributor, and set up our own factory and technical engineering team in the year of 2007. All products presented to our clients have already passed our interior strict quality control examination, which enable our clients to easily choose suitable products with exceptional quality.
Dicore draws upon its powerful Technology team, big producing capacity, well-known purchasing ability and close relationship with manufactures to offer full line products with exceptional quality, and bring productivity improvements to our clients. As an One-Stop supplier, we have our special advantages in this field as following:
